Imagine eagerly tossing a load of laundry into your Whirlpool dryer, only to find it stubbornly refusing to start. Frustrating, right? Don’t worry; you’re not alone. In this guide, we’ll explore common reasons behind a Whirlpool dryer not starting and walk you through troubleshooting steps to get your appliance back in action.
Table of Contents
1. Checking the Power Supply
Before diving into complex diagnostics, start with the basics. Ensure the dryer is plugged in, and the circuit breaker is not tripped.
2. Examining the Door Switch
A faulty door switch can prevent the dryer from starting. Check if the door is securely closed and the switch is functional.
3. Verifying the Thermal Fuse
The thermal fuse protects the dryer from overheating. If it’s blown, the dryer won’t start. Check and replace if necessary.
4. Inspecting the Start Switch
The start switch initiates the drying cycle. Confirm it’s working by listening for a clicking sound when pressed.
5. Ensuring the Timer is Functional
A malfunctioning timer can disrupt the entire drying process. Check if it advances through the cycle.
6. Investigating the Drive Motor
The drive motor powers the drum rotation. If it’s defective, the dryer won’t start. Listen for unusual sounds or a humming noise.
7. Examining the Belt
A broken or slipped belt can hinder the drum’s movement. Inspect and replace the belt if necessary.
8. Looking at the Idler Pulley
The idler pulley maintains tension on the belt. Ensure it moves freely and is not damaged.
9. Inspecting the Terminal Block
Faulty wiring at the terminal block can disrupt power flow. Check for burnt or damaged connections.
10. Addressing Electronic Control Board Issues
Issues with the control board can impede the dryer’s functionality. Look for error codes or signs of malfunction.
11. Checking for Overheating
Overheating can trigger safety features that prevent the dryer from starting. Allow it to cool before attempting to use again.
12. Assessing the Moisture Sensor
A malfunctioning moisture sensor may erroneously detect dampness, preventing the dryer from starting. Clean or replace as needed.
13. Cleaning the Lint Filter
A clogged lint filter restricts airflow, causing overheating. Regularly clean the filter to ensure optimal performance.
14. Examining the Power Cord
Inspect the power cord for damage. Replace it if frayed or worn to prevent electrical hazards.
15. Professional Help: When to Call a Technician
If all else fails, it’s time to seek professional assistance. A certified technician can diagnose and fix complex issues beyond DIY troubleshooting.
In the quest to revive your Whirlpool dryer, these troubleshooting steps empower you to identify and address common issues. Remember, a little detective work can save you time and money. However, if problems persist, don’t hesitate to enlist the help of a professional technician.
Frequently Asked Questions
Why won’t my Whirlpool dryer start even though it’s plugged in?
- Check the power supply, ensuring the circuit breaker is not tripped.
Is a blown thermal fuse a common reason for a non-starting dryer?
- Yes, the thermal fuse safeguards against overheating, and a blown fuse can halt the dryer.
What should I do if the start switch doesn’t make a clicking sound?
- A non-clicking start switch may be faulty; consider replacing it.
Can a malfunctioning timer impact the dryer’s ability to start?
- Absolutely, a malfunctioning timer can disrupt the drying cycle; ensure it advances correctly.
When should I call a professional technician for dryer issues?
- If DIY troubleshooting fails or if you’re unsure about handling complex repairs, it’s time to seek professional help.